What freight class is lumber, bundled or banded?
Typically class 55–70 — around 30–40 lb/ft³.
This commodity is classified by DENSITY, which means there is no single correct class for it — the class depends on how your particular shipment is packed. The range above is what typical shipments measure, not a ruling.
Confidence: high. Well documented across multiple carrier and NMFC sources that agree. The binding answer is always the commodity's NMFC item as filed — this page is a planning estimate, not a classification ruling.
Why lumber, bundled or banded rates this class
Dimensional lumber typically lands around Class 60; tightly banded dense hardwood can reach the new Class 55 tier added in 2025.
Where 30–40 lb/ft³ lands on the current scale
| If density is | Class | Weight on a standard pallet |
|---|---|---|
| 30 – 35 lb/ft³ | 60 | 1,600 – 1,867 lb |
| 35 – 50 lb/ft³ | 55 | 1,867 – 2,667 lb |
A typical lumber, bundled or banded shipment spans more than one class band — which is exactly why quoting a single class for this commodity is unreliable. Measure the actual pallet.
How to get the real number
- 1.Measure the extreme outside dimensions of the loaded pallet — including any overhang and the pallet itself.
- 2.Weigh it loaded, pallet included.
- 3.Divide weight by cubic feet to get density in lb/ft³.
- 4.Look the density up on the July 19, 2025 scale — or let the calculator do all four steps.
Category: Building & construction materials. See the full density chart or how NMFC codes assign class in the first place.